34T Forums
34T Forums
Volver a 34T | Mi Perfíl | Registrarse | Temas activos | Buscar
Username:
Password:
Save Password
 Todos los foros
 Otros productos 34Telecom
 Cuestiones de configuración
 firm rb433
 Forum Locked  Topic Locked
 Formato imprimible
Autor Previous Topic Topic Next Topic  

lalvarez

19 Posts

Posted - 10/12/2009 :  08:50:36  Show Profile
La consulta era que tengo varias tarjetas RB433 de mikrotik con el firm 3.10 y queria saber si deberia actualizarlo, de donde puedo sacar el firm y que mejoras o soluciones importantes tiene.

Gracias saludos

Riccardo

932 Posts

Posted - 10/12/2009 :  10:18:31  Show Profile
http://66.228.113.58/routeros-mipsbe-3.30.npk te aconsejo instalar este firmware.

Esto lo que ha cambiado:

What's new in 3.30:

*) added connection-rate matcher;
*) receiving too large frame (>1540 bytes) does not hang ether1 on RB4xx;
*) fixed ping - value of 'src-address' was ignored since 3.23;
*) api - limited maximum allowed word length to 65536;
*) fixed IPv6 Router Solicitation message handling;
*) special-login - port could remain used by 'special-login' even after
user logged out. fixed;
*) bonding in active-backup mode and arp link monitoring works when no switch
between endpoints;
*) routing, routing-test - fixed route redistribution crash;
*) ups - show voltage in .01V units;
*) console - 'torch' and 'wireless scan' commands have new argument
'duration' that approximately limits running time of the command;
*) api - 'torch' and 'wireless scan' commands now return same values
in '!re' responses as in console (before they didn't return
anything), '.proplist' is also correctly handled;
*) fixed problem - sometimes netinstall did not show new software id;
*) added support for BGP aggregates from IGP routes;
*) user manager - no backup for deleted logs;

What's new in 3.29:

*) fixed problem - local bandwith test could take all the CPU to itself
not allowing other tasks to run;

What's new in 3.28:

*) fixed hotspot problem - on multi-processor systems it was not possible
to set IP address for hotspot client during login - deadlock did happen;
*) fixed hotspot problem - it was possible for hotspot to spike CPU usage
to 100% and not to accept new logins during that time;
*) added ethernet broadcast support for WakeOnLan tool;
*) api - value of 'comment' property was only returned from 'system' package
programs;
*) to see actual values of sensitive configuration parameters (such as
passwords), user needs to possess policy 'sensitive';
*) avoid problems with western time zones by always advancing clock on
startup past january 2st 1970, 00:00:00 UTC;
*) added 'run-after-reset' argument to 'reset-configuration' command. It
allows to specify name of console scriptss file to run after the
configuration reset reboots the router. When this argument is used any
other default configuration scriptsss are ignored.
*) route - fixed a crash;
*) routing-test - fixed OSPF routing table calculation;
*) send keepalives every 30s (was 3 min) on ppp clients - make some 3G connections
more stable;
*) routing-test - changed BGP network and default-originate behaviour;
*) web proxy - allow to edit error page;
*) console - terminal window size change now does not trigger full terminal
reset;
*) mesh protocol - improved loop prevention (becomes incompatible with earlier versions);

What's new in 3.27:

*) fixed memory leak in DNS;

What's new in 3.26:

*) fixed hotspot problem - deadlock was possible on multi-processor routers;
*) fixed problem - it was possible for RouterBOARD to loose configuration
after upgrade to RouterOS version 3.25;
*) added MetaROUTER support on RB1000;
*) using pptp and eoip tunnels simultaneously could crash router;
*) api - "comment" property was not accessible, fixed;
*) console, api - fixed handling of decimal fractions in time interval values;
*) bonding interfaces could sometimes disappear after reboot;
*) changed mesh protocol to send routing packets to broadcast address;
*) automaticly add ppp client interface when GPRS/3G modem is plugged in;
*) added simple/advanced mode to ppp client in WinBox;
*) added support for Huawei E1550 UMTS/HSDPA modem;
*) added support for Cricket Wireless A600 modem;
*) added support for yet another Globetrotter HSDPA modem;
*) added support for Sony-Ericson MD300 modem;
*) added support for ZTE MF626 & MF627 modems;

What's new in 3.25:

*) fixed problems with files under MetaROUTERs;
*) made WinBox work better on smaller screens;
*) made WinBox to not bring down BGP & OSPF when BGP window was opened;
*) WinBox menu is better organized, all sub-menus are sorted;
*) fixed WinBox problem - /128 IPv6 addresses could not be entered
where network address was expected;
*) added l2mtu interface parameter with ability to configure for
interfaces that support it;
*) RB1xx ether1 did not work properly in switch mode;
*) api - do not accept truncated property names;
*) api - closed sessions were not removed from the '/user active' list;
*) routing, routing-test - fixed a BGP crash;
*) routing-test - deleted routes were sometimes left displayed in Winbox;
*) routing-test - fixed BGP interoperability issue with old Ciscos;
*) routing-test - added remove-private-as BGP peer config option;
*) added few more variables to hotspot html pages:
bytes-total, bytes-total-nice, packets-total
*) bandwidth-test supports testing over multiple tcp connections (default 20);
*) graphing - HTML page refresh-interval configurable in console;
*) user manager - IP pool added to user batch-add form;

What's new in 3.24:

*) added ability to run non RouterOS in MetaROUTER;
*) improved address-list and layer7 firewall feature support for smp systems;
*) special-login items can now be disabled;
*) fixed special-login to update used-by property of port;
*) fixed USB UPS monitoring on RB433UAH;
*) console - 'print' command reuses assigned item numbers;
*) fixed issue with Cisco BGP VPLS when used between 2 RouterOS devices;
*) console - 'print' commands have new option 'follow-only' that continuously
shows changes like the 'follow' option, but does not print all items
at the beginning;
*) api - 'follow' and 'follow-only' options of 'print' commands now work,
'.dead' property is reported for deleted items;
*) api - 'listen' command now is alias for 'print' with 'follow-only'
opriont set;
*) api - several commands running in parallel could produce intermixed
output, fixed;
*) console and api - fixed problem that caused property values sometimes to
incorrectly have value '(unknown)', this could happen when running
several console or api commands at once;
*) fixed BGP VPLS crash when site-id > 15 used somewhere in network;
*) changed BGP AS path number output format to ASPLAIN;
*) console - new scheduler tasks use trimmed effective user permissions as the
default value of policy, previously default value was "read,write,test";
*) added ttl matcher to ipv4 firewall;
*) improved dns cache not to allow other RRs in statically configured domains;
*) fixed vlan on bonding;
*) fixed bonding modes balance-alb and balance-tlb;
*) added per-connection-classifier matcher to firewall;
*) fixed wireless Hw. Fragmentation Threshold in WinBox;
*) user manager - added option to specify custom Return URL
for Authorize.Net payments;
*) user manager - write logs to syslog topic manager,account;
*) routing-test - support for per-VRF BGP instance redistribute settings;
*) routing-test - speed up BGP route processing;
*) routing-test - added routing-table configuration to RIP;

What's new in 3.23:

*) added WakeOnLan tool
*) fixed installation on fresh disks or VMs;
*) add 802.1ad Service Tag support for VLAN;
*) wireless - fix for RTS/CTS when used together with dynamic ACK timeout;
*) serial ports are now grouped per USB device;
*) added gsm info command to ppp-client;
*) added URL support to fetch tool;
*) added dial-on-demand mode to PPTP & L2TP clients;
*) ssh - now non-interactive console commands can reference variables;
*) fixed TFTP server logging;
*) fixed problem - "/system upgrade" (autoupgrade) did not show proper package
architecture and was unable to fetch new packages;
*) fixed bug - hotspot 'walled garden ip' rules did not work on some boards
after reboot;
*) added '/interface print stats' command;
*) improved support for OSPF as PE-CE routing protocol;
*) added OSPF sham links;
*) fixed a bug in set-bgp-prepend-path routing filter;
*) fixed some MPLS TE reoptimize bugs;
*) added MPLS TE bandwidth management features;
*) netwatch - ignore items with interval 0s, this value was causing
netwatch to fail;
*) routing-test - added new type of gateway argument: ip address together with interface;
*) api - 'disabled' property was not available from api since 3.21, fixed;
*) api - added support for retrieving OID values;
*) api - removed special behaviour of 'find' command under API. Use
'print' command with queries instead of 'find'. This change fixes
scriptsss that are started from API and contain 'find' command.
*) console - removed support for octal numbers, now string of digits with
a leading zero is interpreted as decimal number;
*) console - added binary ~ operator that matches value against
POSIX extended regular expression;
*) console now accepts decimal numbers with k/K M G T P suffixes for
values of some properties;
*) console - fixed export problems:
if long line is wrapped just before space charater, the space character
has to be escaped, otherwise it is lost;
errors during export generated a comment line that was incorrectly enclosed
in quotes;
*) console - added binary ~ operator that matches value against
POSIX extended regular expression;
*) scheduler - added owner and policy properties; all existing
scheduler entries will get owner name "*sched" and policy
read,write,test;
*) routing-test - allow to specify that route gateway is in the main routing table;
*) added route cache statistics;
*) fixed mesh protocol;
*) graphing - fixed IP address mask display issue for low endian architectures;

What's new in 3.22:

*) added advanced switch features for RB450G;
*) added support for MetaROUTER on RB450G;
*) added support for adding physical interfaces to Metarouters;
*) added set-bgp-prepend-path action to routing filters;
*) added WinBox OSPFv3 support to routing-test package;
*) added WinBox IPv6 routes support to routing-test package;
*) console - added 'hide-sensitive' option to the export command;
*) user manager - fixed customer remove interface bug;
*) fixed Cisco BGP VPLS autodiscovery in mpls-test package;
*) fixed LDP to not disconnect on unknown capabilities of remote
peer (should help establish LDP session with Junos);
*) fixed ethernet port name reordering on RB493;
*) bonding mode balance-alb now works on RB1xx, RB4xx, RB616, RB600, RB750,
RB1000;
*) added '/interface ethernet print stats' command for RB450G and RB750;
*) fixed CSPF in routing-test to properly interpret link bandwidth;
*) added support for C-motech CNU-680 CDMA 1x EV-DO 450Mhz USB Modem;

What's new in 3.21:

*) backported MetaROUTER support for RB4xx from v4;
*) added WinBox MPLS & VPLS support mpls-test package;
*) added WinBox BGP support to routing-test package;
*) api - added query support for 'print' command;
*) added support for bsd-syslog;
*) added TFTP server;
*) added authorization and TLS support to email tool;
*) added pppoe-scanner;
*) added tftp protocol support to fetch tool;
*) fixed ipsec policy priority to work as documented;
*) fixed BGP route selection in routing package;
*) allow to use IPsec aggressive mode with pre-shared keys;
*) fixed some problems in mesh protocol;
*) fixed https proxying with parent proxy;
*) fixed Prism shared IRQ issue;
*) fixed multiple MPLS/VPLS bugs in mpls-test;
*) fixed boot problems on some RB1000s;
*) added /interface mesh traceroute command;
*) fixed web proxy source address selection;
*) fixed pcq queue - pcq sometimes could get through more traffic
than specified in max-limit;

What's new in 3.20:

*) added support for IPsec hardware acceleration on RB1000,
increases IPsec SHA1-3DES encryption from 45Mbps to 500Mbps
and SHA1-AES from 79Mbps to 500Mbps;
*) fixed IPv6 on RB1xx and RB5xx;
*) added support for ZTE MY 39, CDMA EVDO USB card;
*) added clear-df action to firewall;
*) fixed bug - sometimes netinstall could fail to install RouterBOARD
with "ERROR: could not format partitions";
*) fixed PCQ bug - pcq-rate < 70000 did not work correctly (broken in 3.17);
*) added radius-mac-format setting in hotspot server profile;
*) allow to use ip firewall for encapsulated PPPoE packets;
*) graphing - fixed 10Gbit card bug;


What's new in 3.19:

*) fixed problem - web proxy used up all router memory
if unlimited ram caching was enabled;
*) fixed problem - some log topics got swapped in configuration;
*) reduced maximum supported memory for RB1000 to 1.5Gb (was 1.75Gb);
*) interface mesh was not working in 3.18, fixed;
*) fixed Prism crash;
*) fixed VPLS interface related crash in mpls-test;
*) allow to enter range in BGP instance confederation peers;
*) console - fixed '/system backup save' command, name argument is
optional, and backup file name is automatically generated if empty;
*) sped up IPv6 forwarding on RB4xx, RB1xx and RB5xx;
*) fixed BGP route selection in routing-test;
*) fixed dhcp server to update agent-circuit-id and agent-remote-id for lease
whenever it changes;

What's new in 3.18:

*) IPv6 address auto-configuration: added recursive DNS server option;
*) fixed problem - sometimes firewall did not work after reboot on RB1xx;
*) do not send IPv6 packets over PPTP, L2TP or PPPoE - could confuse some
servers or clients;
*) allow queues to have all traffic, not only ip (for example vpn);
*) added ability to specify dns name in bandwidth test in WinBox;
*) fixed problem - sometimes RB1xx (and RB4xx) could not start up or startup was very long;
*) improved ipv6 sniffing;
*) improve torch and sniffer behavior under high load;
*) improved queue statistics;
*) fix xen make-routeros-image command;
*) fix potential wireless crash under load when negotiating encryption;
*) fix several MPLS issues in mpls-test;
*) fixed support for Novatel Wireless Ovation MC950D HSUPA;
*) fixed some bugs in routing-test OSPF;
*) added support for D-Link DUB-E100 USB Ethernet adapter;
*) fixed user-manager database rebuild command to succeed in case of
malformed database disk image;
*) sms - added descriptssions for error codes;
*) sms - added automatic 'smsc' (service centre address) value detection,
to work around first time error when sending SMS without specifying
an 'smsc' value;
*) fixed - during uptime 4:20 .. 5:00 interface traffic (byte and packet
count) was being reported 100 times larger than the actual value;
*) provide L2TP server address in Called-Station-Id when doing authentication over RADIUS;
*) added support for Sierra Wireless MC8790;
*) recalibrated noise floor adjustment for R5H;
*) updated drivers & kernel - fixed fast clock issue on x86;

What's new in 3.17:

*) added support for Intel 10Gb PCI Express driver;
*) made Huawei E220 USB modem work again;
*) added support for Novatel Wireless Ovation MC950D HSUPA;
*) fixed PCQ fairness when pcq-total-limit is reached;
*) fixed fetch tool to work when dst-path is not specified (broken in 3.16);
*) fetch tool - added keep-result command line argument;
*) allow to specify routing-table for ping, trace-route, and telnet;
*) fixed an IPsec bug;
*) fixed /ip firewall address-list;
*) added propagate-ttl option for MPLS;
*) fix very long wireless scan-list issues;
*) fixed problem - sometimes PCQ could stop data pass-through if pcq-rate was set;
*) fixed problem - L2TP could stop working when one of clients stopped responding
at wrong time;
*) fixed problem - reduced size of supout.rif files;
*) graphing - support for 10 Gbit interfaces;
*) routing-test - added support for multi-instance OSPF;
*) user manager - fixed bug for PayPal payments with long parameter list;
*) user manager - database load command supports external storage
for temporary files;
*) user manager - added support for all UTC time-zone offsets,
including +5:30, +5:45, etc.;

What's new in 3.16:

*) added support for IGMP proxy;
*) improved Nstreme polling in wireless-test;
*) routing-test - routing filters now use regular expressions
to match BGP AS_PATH; use '_' (underscore) to match any of:
comma, space, beginning of line, end of line, parentheses, braces;
*) make secondary disk contents visible under /file;
*) console - allow use of '/' and '.' characters in backup, export
and print output file names;
*) fixed bug - hotspot universal client did not work for clients
with IP address ending with 127 or with 224-239;
*) fixed problem - x86 clock was 10 times faster then it should be on some boards;
*) fixed kernel panic on RB1000;
*) console - fixed wrapping of long lines in GNOME Terminal;
*) console - autodetect Mac OS X Leopard Terminal.app, fixes condition
when only the bottom line of the terminal was used;
*) console - 'find' commands could not match some properties, like
'routing-mark' of the '/ip route find' command. Fixed;

What's new in 3.15:

*) added workaround for non-standards compliant CPE with timestamp issue;
*) added ability to manage multiple disks & stores under /store;
*) added support for storing user-manager database on secondary media via /store;
*) /store should be used to set up secondary disk as web proxy cache;
*) added support for Mesh in WinBox;
*) fixed client roaming in mesh protocol;
*) fixed bug in MME routing protocol:
routes sometimes were lost from routing table;
*) fixed some bugs in routing-test;
*) fixed traffic forwarding when VRF (virtual routing and forwarding) is used;
*) fixed problem - USB did not work on Geode LX boards;
*) fixed problem - farsync cards did not negotiate links;
*) added support for Novatel EU870D;
*) added support for Intel 82575EB & 8257GB gigabit ethernet PCI-Express cards;
*) removed support for all synchronous cards but farsync;
*) graphing - all target (source) addresses displayed in queue statistics page;
*) bridge firewall broute table is removed - it did not work as expected anyway;
*) ingress-priority matcher added to bridge firewall
*) fixed use-dns property of console traceroute command, default now is
use-dns=no;
*) updated UK 5.8 FIXED regulatory domain info;
*) /system ssh now by default uses name of logged in user instead of "admin";
*) fixed support for some microSD cards on RB400;
*) include Relay-Session-ID in packets sent by PPPoE client if required;
*) added ability to specify src. address for radius client;
*) dns cache - improved static entry behavior;
*) fixed dial-on-demand on ppp interfaces;

What's new in 3.14:

*) fixed '/xen console' command;
*) fixed problem - queue bursts did not work;
*) added support for OSPF NSSA in routing-test;

What's new in 3.14rc1:

*) updated drivers, some of the changes:
synchronous cards should work in frame relay mode;
SIP connection tracking is more standards conformant;
valid TCP connection packets will not be marked as invalid;
*) mlppp - fixed problem when small packets could not be transmited
while more than 2 links were active;
*) bgp - fixed attribute flags checking;
*) fixed dhcp client - routes were not added back after lease expires
and then is acquired again;
*) fixed handling of multiple identical address-list entries
*) ospf could become unresponsive in some situations, fixed;
*) winbox - fixed problem: when moving multiple items at once,
correct order was not maintained;
*) fixed automatic fan control on RB600;
*) added ipv6 firewall address-list;
*) fixed some bugs in mesh protocol driver;
*) fetch tool - added basic HTTP authentication;
*) 6to4 tunnel - allow to specify remote address;

What's new in 3.13:

*) hotspot - fixed dst-nat for SMTP (broken in 3.11);
*) dhcp client - added support for DHCP option 121 (classless route);
*) fixed simple queues - changing simple queues could lock up i386 routers
*) routing-test - added support for multiple recursive nexthops;
*) routing-test - fixed BGP AS number byteorder, broken in 3.12;

What's new in 3.12:

*) fixed problem - static queues on PPPoE, PPTP, L2TP interfaces became invalid
on client reconnect;
*) changed behaviour of simple queues - queues with no limit and type default-small
and no children actually do not get installed, as if there was no queue;
*) console - allow "{}" array syntax only for some command arguments, as it
does not make sense in most cases and interferes with the existing
scriptsss. Now "/system scriptss add source={....}" works as it did
before 3.11;
*) graphing - fixed crash when dynamic interfaces/queues disappear;
*) fixed IPv6 address auto-configuration on routerboards;
*) added support for OSPFv3;
*) improved PCQ queueing algorithm;
*) dhcp server - pass Agent-Remote-Id and Agent-Circuit-Id to Radius server;
*) user manager - option to use test gateway for Authorize.Net payments;
*) fixed bug - web server could lock up at startup
(no access to hotspot login page after that);
*) routing-test - added support for 4-octet BGP AS numbers;
*) routing-test - added default-originate feature for BGP peers;
*) routing-test - added IPv6 BGP networks and aggregates;

What's new in 3.11:

*) fixed bug - in some cases web proxy https with parent-proxy did not work;
*) added default-route-distance setting for DHCP client;
*) mesh protocol - bridge interface in a mesh did not work well, fixed;
*) multicast - fixed bootstrap router (BSR) mechanism;
*) user manager - users can now be redirected to HotSpot login page after
PayPal payment;
*) added ability to dst. nat only address or port, not both at the same time;
*) ospf - fixed default route;
*) ipsec - fixed tunnel mode with dynamically generated policy;
*) port remote-access - fixed allowed-addresses check;
*) ethernet half duplex modes on rb400 series work now;
*) console - fixed entering of IPv6 prefixes;
*) console - fixed crash on window size change;
*) console - bit operations (& ^ | << >>) now work with numbers, too;
*) console - brace syntax for array declarations ( { value ; value ; value } )
now can be used also where () expressions can be used, previously
worked only inside the expressions. Example:
:foreach i in {1;2;3;4} do={:put $i}
*) console - inside expressions ',' operator can be used to concatenate arrays,
unlike '.' which works with strings. Arguments that are not arrays are
treated like arrays with single element. Example:
{1,2,3;4,5,6;7,8,9} produces value {{1;2;3};{4;5;6};{7;8;9}}
(1,{2},{{3;4}},5,{},{6,7},8) produces value {1;2;{3;4};5;{6;7},8}
*) console - 'move' commands no allow list of source items to be empty and
to contain duplicate items. The porpose is to simplify scriptsss that use
'find' commands to move items. Example:
move ([find dynamic],[find inactive]) - moves all 'dynamic' and
'inactive' items to the end of the list, does not raise error if
any item is both 'dynamic' and 'inactive', or if there are no items;
*) console - 'move' command does not update item numbers anymore;
Go to Top of Page

lalvarez

19 Posts

Posted - 10/12/2009 :  11:24:09  Show Profile
Gracias.
He copiado el fichero con el winbox y después en la consola de comandos he ejecutado un upgrade en /system routerboard para actualizar el firm. Pero al reiniciarlo me ha desaparecido el menu de wireless, junto con la interface wireless y no veo que pueda añadirla de ninguna manera. ¿Que puede haber pasado?
Go to Top of Page

Riccardo

932 Posts

Posted - 10/12/2009 :  11:28:27  Show Profile
sysstem routerboard upgrade simplemente hace un upgrade de la bios no de la firmware. Controlo que tiene el paquete wireless en system packages.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Formato imprimible
Saltar a:
34T Forums © 34T/Snitz Go To Top Of Page
Snitz Forums 2000